ZDS系列高浓水力碎浆机系统/ ZDS Series H.C. Pulper System 
ZDS系列高浓水力碎浆机系统/ ZDS Series H.C. Pulper System
产品详情

ZDS系列高浓水力碎浆机系统/ ZDS Series H.C. Pulper System

系统组成 /SYSTEM COMPonENTS

1

高浓水利碎浆机

H.C.Hydrapulper

2

链板输送机

Chain Conveyer

3

挑选园筒筛

Bale Breaker

4

圆筒筛

Drum Screen

5

杂质分离机

Impurity Separator

6

浆泵

Pulp Pump

结构特点:
该系统由D型水力碎浆机、绞绳机、切断器、沉渣井、抓斗、杂质分离机、圆筒筛、PLC控制部分组成。
D型水力碎浆机的转子和出浆盘高出碎浆机槽体底平面,在转子周围形成--个低压流区,使碎解过程中的粗大杂质从重渣口进入沉渣井,再利用抓斗定期排出。
废纸中的缠绕性杂质在回转浆流的作用”下绞成绳状,由绞绳机拉出,进入沉渣井的掺带部分浆料和轻杂质,周期性地进入杂质分离机,经过处理后的良浆与碎浆机良浆汇合,送下一工序处理。粗大杂质经冲洗后送至圆筒筛排出系统,回收的浆进入碎浆机。整个系统工作程序由一个PL.C控制器进行控制。

Design Features:
The system consists of D-type hydrapuler, ragger, cutting machine, dregs well, grab bucket impurity separator, drum screen and PL C controller.

Compared with the traditional hydrapulper, it could shorten the time of pulp breaking and increase productvity without increasing the volume and power. D-type hydrapulper rotor and the outlet tray are above the bottom suface of pulper vat to fom a low-pressure flow area around the rotor s0 as to make the coarse impurities flow from the heavy impurity outlet into the dregs well during pulping and the discharge impurities by grab buck el regularly. Allecled by turning pulp flow, the winding impurities in waste paper are twisted into the rope, which can be pulled out by the ragger. The remain pulp and light impurities flowing into the dregs well will be sent to the impurity separator for prcession with periodicity. The pro-cessed accept is integrated with the pu per accept and the n the pulp will enter the next working procedure. After washed, the caarse impurities will be sent to the drum screen for discharge out of the system The recycled pulp will flow into the pulper. The working procedure of the complete system will be under control ofPLC.

福建省轻工机械设备有限公司
地址:福建省福州市闽侯县铁岭北路3号
电话:+86(591)22079888  22628228
传真:+86(591)22079666
邮箱:info@
网址:www.    www.fjlime.com